Home / ECE / Analog Electronics :: Section-23

ECE :: Analog Electronics

  1. In a transistor switch, the voltage change from base-to-emitter which is adequate to accomplish the switching is only about
  2. A.
    0.2V
    B.
    0.4V
    C.
    0.1V
    D.
    0.5V

  3. Which of the following is the conversion time of a dual-slope ADC
  4. A.
    5 to 10 ns
    B.
    10 to 100 ns
    C.
    100 to 200 ns
    D.
    2 to 3 ns

  5. If a certain multiplexer can switch one of 32 data inputs to its output. How many different inputs does this MUX have?
  6. A.
    30 data inputs & 5 select inputs
    B.
    32 data inputs and 5 select inputs
    C.
    32 data inputs and 4 select inputs
    D.
    None of the above

  7. Which of the following is the value of unity gain bandwidth of 741 OPAMP
  8. A.
    4 MHz
    B.
    2 MHz
    C.
    6 MHz
    D.
    1 MHz

  9. __________ is known as fastest switching logic family
  10. A.
    CMOS
    B.
    TTL
    C.
    DTL
    D.
    ECL

  11. The voltage between the emitter and collector of a silicon transistor when the transistor is biased to be at the edge of saturation is
  12. A.
    5 volts
    B.
    10 Volts
    C.
    0.1 Volts
    D.
    0.3 Volts

  13. Schottky TTL gates have propagation delay time of the order of
  14. A.
    6ns
    B.
    5ns
    C.
    2ns

  15. How many comparators does a 12-bit flash ADC require
  16. A.
    4000
    B.
    3095
    C.
    4095
    D.
    2512

  17. Open-loop voltage gain of 741 OPAMP is ________
  18. A.
    40 dB
    B.
    200 dB
    C.
    100 dB
    D.
    70 dB

  19. In Worst case ECL noise margins are approximately
  20. A.
    100 mV
    B.
    50 mV
    C.
    250 mV
    D.
    400 mV