Home / ECE / Digital Electronics :: Section 7

ECE :: Digital Electronics

  1. If an analog voltage is expressed in binary using 4 bits, each successive binary count would represent

  2. A.
    of total voltage
    B.
    of total voltage
    C.
    of total voltage
    D.
    of total voltage

  3. In a 4 input AND gate, the total number of High outputs for 16 input states are

  4. A.
    16
    B.
    8
    C.
    4
    D.
    1

  5. Symmetrical square wave of time period 100 μs can be obtained from square wave of time period 10 μs by using

  6. A.
    divide by 5 circuit
    B.
    divide by 2 circuit
    C.
    divide by 5 circuit followed by divide by 2 circuit
    D.
    BCD counter

  7. The Boolean expression for the shaded area in the Venn diagram is

  8. A.
    X + Y + Z
    B.
    XY + Z + X YZ
    C.
    X Y Z + XY
    D.
    X + Y + Z

  9. The initial state of a Mod-16 counter is 0110. After 37 clock pulses the state of counter will be

  10. A.
    1011
    B.
    0110
    C.
    010
    D.
    0001

  11. A 14 pin AND gate IC has __________ AND gates.

  12. A.
    8
    B.
    6
    C.
    4
    D.
    2

  13. In 8085 microprocessor, how many lines are there in data bus?

  14. A.
    6
    B.
    8
    C.
    2
    D.
    16

  15. The basic shift register operations are

  16. A.
    serial in - serial out
    B.
    serial in - parallel out
    C.
    parallel in - serial out
    D.
    all of the above

  17. The hexadecimal number 'A0' has the decimal value

  18. A.
    80
    B.
    256
    C.
    100
    D.
    160

  19. A 4 bit ripple counter is in 0000 state. The clock pulses are applied and then removed. The counter reads 0011. The number of clock pulses which have occurred are

  20. A.
    3
    B.
    3 or 19
    C.
    3 or 19 or 35
    D.
    none of the above