Home / ECE / Digital Electronics :: Section 11

ECE :: Digital Electronics

  1. Digital technologies being used now-a-days are

  2. A.
    DTL and EMOS
    B.
    TTL, ECL, CMOS and RTL
    C.
    TTL, ECL and CMOS
    D.
    TTL, ECL. CMOS and DTL

  3. A seven bit code (even parity) 1111101 may have error. The correct code is

  4. A.
    1111101
    B.
    1111111
    C.
    0101011
    D.
    1100011

  5. A/D parallel converter is also called flash converter.

  6. A.
    True
    B.
    False

  7. Square root of 4 is

  8. A.
    (16)16
    B.
    (2)2
    C.
    (8)16
    D.
    (5)16

  9. Periodic recharging of the memory cells at regular intervals of 3 to 8 millisecond is required in a

  10. A.
    ROM
    B.
    Static RAM
    C.
    Dynamic RAM
    D.
    PLA

  11. The frequency of the driving network connected between pins 1 and 2 of a 8085 chip must be

  12. A.
    equal to the desired clock frequency
    B.
    twice the desired clock frequency
    C.
    four times the desired clock frequency
    D.
    eight times the desired clock frequency

  13. Assertion (A): Divide-64 counter is a Mod-64 counter and divides the input frequency by 64

    Reason (R): A Mod 64 counter can be obtained by cascading Mod 16 and Mod 4 counters.

  14. A.
    Both A and R are correct and R is correct explanation of A
    B.
    Both A and R are correct but R is not correct explanation of A
    C.
    A is true, R is false
    D.
    A is false, R is true

  15. In number system e.g. 6, a “decade” counter has to recycle to 0 at the sixth count. Which of the connections indicate below will realize this resetting? (a logic “0” at the R inputs resets the counters)

  16. A.
    B.
    C.
    D.
    None of these

  17. In 8085 microprocessor, in order to enable INTR interrupt, which of the following instruction are needed?

  18. A.
    EI only
    B.
    SIM only
    C.
    El and SIM both
    D.
    None