Mechanical Engineering :: Strength of Materials
-
A steel bar 2 m long, 20 mm wide and 10 mm thick is subjected to a pull of 2 kN. If the same bar is subjected to a push of 2 kN, the Poission's ratio of the bar in tension will be __________ the Poisson's ratio for the bar in compression.
-
A square beam and a circular beam have the same length, same allowable stress and the same bending moment. The ratio of weights of the square beam to the circular beam is
-
A thin cylindrical shell of diameter (d), length (l) and thickness (t)is subjected to an internal pressure (p). The hoop stress in the shell is
-
When a body is subjected to a direct tensile stress (σ) in one plane, then tangential or shear stress on an oblique section of the body inclined at an angle θ to the normal of the section is
-
The distance between the centre of a rivet hole to the nearest edge of plate, is called
-
A localised compressive stress at the area of contact between two members is known as
-
Two closely-coiled helical springs 'A' and 'B' are equal in all respects but the number of turns of spring 'A' is double that of spring 'B'. The stiffness of spring 'A' will be __________ that of spring 'B'.
-
In a tensile test, when the material is stressed beyond elastic limit, the tensile strain __________ as compared to the stress.
-
A section of beam is said to be in pure bending, if it is subjected to
Whatsapp
Facebook
