Home / ECE / Exam Questions Paper :: Section 8

ECE :: Exam Questions Paper

  1. The time constant of the network shown in figure is

  2. A.
    2 RC
    B.
    5/3 RC
    C.
    RC/2
    D.
    None of these

  3. For the 8085 assembly language program given below, the content of the accumulator after the execution of the program is

  4. A.
    00H
    B.
    45H
    C.
    67H
    D.
    E7H

  5. Consider the following BJT circuit:
    hie = 2 k ohm
    hfe = 100
    hre = 2.5 x 10-4

    The value of Ri is :

  6. A.
    2.46 kΩ
    B.
    2.88 kΩ
    C.
    200 Ω
    D.
    18.48 Ω

  7. . The signal is __________ .

  8. A.
    periodic for t > 0
    B.
    non-periodic
    C.
    periodic for t < 0
    D.
    depends on t

  9. The electric field of uniform plane wave is given by E = 20 sin (2 p x 108t- pz) x + 20 cos (2 p x 108t - pz) y. The polarization of wave is

  10. A.
    Elliptical, left handed
    B.
    Circular, left handed
    C.
    Elliptical, right handed
    D.
    Circular, right handed

  11. A two port network shown below is external dc sources. The voltages and the currents are measured with voltmeters V1 V2 and ammeter A1 A2 (all assumed to be ideal), as indicated. Under following switch conditions, the readings obtained are:
    (i) S1 - Open, S2 - Closed A1 = 0A, V1 = 4.5 V, V2 = 1.5 V, A2 = 1 A
    (ii) S1 - Closed, S2 - Open A1 = 4A, V1 = 6 V, V2 = 6 V, A2 = 0 A

    The z-parameter matrix for this network is


  12. The Z-transform of a particular signal is given as X(Z) = where
    This system after practical implementation will be

  13. A.
    Non Causal and Stable
    B.
    Causal and Stable
    C.
    Non Causal and Unstable
    D.
    Causal and Unstable

  14. The JFET in the circuit shown in figure has an IDSS = 10 mA and Vp = -5 V. The value of the resistance Rs for a drain current IDS = 6.4 mA is (select the nearest value)

  15. A.
    150 Ω
    B.
    150 Ω
    C.
    560 Ω
    D.
    1 kΩ

  16. In the circuit s closed for a long time and steady state is reached. s is opened at t = 0+ Determine current through resistor.

  17. A.
    A
    B.
    A
    C.
    - A
    D.
    - A

  18. The logic circuit given below converts a binary code y1 y2, y3 into

  19. A.
    Excess - 3 code
    B.
    Gray code
    C.
    BCD code
    D.
    Hamming