Civil Engineering :: UPSC Civil Service Exam Questions
-
Why are gate valves provided in distribution system ?
-
While designing the superelevation of a highway, its maximum value is fixed considering the need to
-
The map projection in which the angle between any pair of short lines is represented correctly is called
-
At a Tee-Junction between a lVa brick wall and a 1 brick wall, one uses a
-
A symmetrical three-hinged parabolic arch of span L and rise h is hinged at springings and crown. It is subjected to a. U.d.l. W throughout the span. Which the banding moment at a section L/4 from the left support.
-
Sheep-foot rollers are recommended for compacting
-
The given figure shows the section of a wooden beam stiffened with two steel plates each of thickness 't' securely fixed to the sides. The second moment of area of the flitched beam about the X-X axis is (given: d = overall depth of the beam, b = width of the wooden section and m = modular ratio of the moduli of elasticity of steel and wood)
-
The portal frame shown in the given figure is statically indeterminate to the
-
A fixed beam and a simply supported beam having same span and develop same maximum bending moment due to uniformly distributed load on entire span. What is the ratio of uniformly distributed load on fixed beam to that on simply supported beam ?
-
Which one of the following method is employed to manufacture pre-stressed concrete sleepers for the railways ?
Whatsapp
Facebook
