Civil Engineering :: UPSC Civil Service Exam Questions
-
Which one of the following is not essential to derive the formula used in constructing a synthetic unit hydrograph ?
-
In an aerial puhotogrammetric survey, if the exposure interval is 20 seconds to cover ground distance of 1000 m between exposures, what would be the ground speed of the aircraft ?
-
The head over a 90° V-notch weir increases from 0.15 m to 0.3 m. The ratio of new discharge to the original discharge is, nearly equal to
-
Consider the following statements with ragard to crack formation and its control:
1. The surface width of the crack should not, in general, exceed 0.30 mm for structures not subjected to aggressive environment.
2. When depth of web in a beam exceeds 750 mm, side face reinforcement @ 0.1 percent of web area should be provided on each face.
3. The nominal spacing of main bars in a slab should not exceed three times the effective depth of a solid slab or 300 mm, whichever is smaller.
Which of the statements given above is/are correct ? -
A rigid bar is supported by a spring as shown in the given figure.
The deflection of the point B will be -
Undrained strength of a clay soil can be obtained by conducting which of the following tests ?
1. UC test
2. Vane sheer test
3. Cyclic triaxial test
4. Slow direct sheer test
Select the correct answer using the code given below : -
Which one of the following is the nominal size of standard modular brick ?
-
What is the ratio of rate of back-washing to that of filtration in a typical rapid sand filter ?
-
A point in an element is stressed as shown in the given figure. What is the value of normal stress on the oblique plane BE ?
Whatsapp
Facebook
