Civil Engineering :: UPSC Civil Service Exam Questions
-
The bending moments at point A, B, and C of the beam shown in the given figure will be:
-
xx, x1 x1 and x2 x2 are parallel axes of which XX is the centroidal axis. If moment of inertia of the figure about x1 x1 axis is 10m4, what is the moment of inertia of the figure about x2 x2 axis?
-
As per Lacey's regime equation, what is the flow velocity proportional to ?
-
Which of the following types of pumps can be used for concreting ?
1. Piston operated.
2. Pneumatically operated.
3. Centrifugal operated, with straight blades.
4. Screw type. -
For medium silt where average grain size is 0.16 mm, Lackey's silt factor is likely to be
-
Guide banks are provided to
-
A soil fails under an axial vertical stress of 100 kN/m2 in unconfined compression test. The failure plane makes an angle of 50° with the horizontal. The shear parameters c and φ respectively will be
-
The fix of a plane table from three known points is good if
-
A hollow steel shaft of external diameter 100 mm and internal diameter 50 mm is to be replaced by a solid alloy shaft. Assuming the same value of polar modulus for both, the diameter of the solid alloy shaft will be
-
For a circular curve of radius 200 m, the coefficient of lateral friction of 0.15 and the design speed is 40 kmph. The equilibrium superelevation (for equal pressure on inner and outer wheel) would be
Whatsapp
Facebook
