Home / Civil Engineering / Highway Engineering :: section-7

Civil Engineering :: Highway Engineering

  1. As per IRC recommendations, the maximum limit of super elevation for mixed traffic in plain terrain is

  2. A.

     1 in 15

    B.

     1 in 12.5

    C.

     1 in 10

    D.

     equal to camber


  3. If b is the wheel track of a vehicle and h is the height of centre of gravity above road surface, then to avoid overturning and lateral skidding on a horizontal curve, the centrifugal ratio should always be

  4. A.

     less than b/2h and greater than co-efficient of lateral friction

    B.

     less than b/2h and also less than co-efficient of lateral friction

    C.

     greater than b/2h and less than co-efficient of lateral friction

    D.

     greater than b/2h and also greater than coefficient of lateral friction


  5. The most efficient traffic signal system is

  6. A.

     simultaneous system

    B.

     alternate system

    C.

     flexible progressive system

    D.

     simple progressive system


  7. The terrain may be classified as rolling terrain if the cross slope of land is

  8. A.

     upto 10%

    B.

     between 10% and 25%

    C.

     between 25% and 60%

    D.

     more than 60%


  9. Rigidity factor for a tyre pressure greater than 7 kg/cm² is

  10. A.

     equal to 1

    B.

     less than 1

    C.

     greater than 1

    D.

     zero


  11. Reaction time of a driver

  12. A.

     increases with increase in speed

    B.

     decreases with increase in speed

    C.

     is same for all speeds

    D.

     none of the above


  13. For rapid curing cutbacks, the oil used is

  14. A.

     gasoline

    B.

     kerosene oil

    C.

     light diesel

    D.

     heavy diesel


  15. “Dead Slow” is a

  16. A.

     regulatory sign

    B.

     warning sign

    C.

     informatory sign

    D.

     none of the above


  17. The aggregates required for one kilometer length of water bound macadam road per meter width and for 10 mm thickness is

  18. A.

     8 cubic meter

    B.

     10 cubic meter

    C.

     12 cubic meter

    D.

     15 cubic meter


  19. Length of a vehicle affects

  20. A.

     width of traffic lanes

    B.

     extra width of pavement and minimum turning radius

    C.

     width of shoulders and parking facilities

    D.

     clearance to be provided under structures such as overbridges, under-bridges etc.