Home / Mechanical Engineering / Refrigeration and Air Conditioning :: section-1

Mechanical Engineering :: Refrigeration and Air Conditioning

  1. Nusselt number (NN) is given by

  2. A.

     NN = hl/k

    B.

     NN = μ cp/k

    C.

     NN = ρ V l /μ

    D.

     NN = V²/t.cp


  3. In case of sensible heating of air, the coil efficiency is given by (where B.P.F. = Bypass factor)

  4. A.

     B.P.F. - 1

    B.

     1 - B. P.F.

    C.

     1/ B.P.F.

    D.

     1 + B.P.F.


  5. The undesirable property of a refrigerant is

  6. A.

     Non-toxic

    B.

     Non-flammable

    C.

     Non-explosive

    D.

     High boiling point


  7. The desirable property of a refrigerant is

  8. A.

     Low boiling point

    B.

     High critical temperature

    C.

     High latent heat of vaporisation

    D.

     All of these


  9. The operating pressure for refrigerating units using R-12 as a refrigerant is

  10. A.

     2 bar

    B.

     8 bar

    C.

     15 bar

    D.

     30 bar


  11. Cooling water is required for following equipment in ammonia absorption plant

  12. A.

     Condenser

    B.

     Evaporator

    C.

     Absorber

    D.

     Condenser, absorber and separator (rectifier)


  13. The coefficient of performance of a domestic refrigerator is ________ as compared to a domestic air-conditioner.

  14. A.

     Same

    B.

     Less

    C.

     More

    D.

     None of these


  15. In aqua ammonia and Lithium bromide water absorption refrigeration systems, the refrigerants are respectively

  16. A.

     Water and water

    B.

     Water and lithium bromide

    C.

     Ammonia and lithium bromide

    D.

     Ammonia and water


  17. In order to cool and dehumidify a stream of moist air, it must be passed over the coil at a temperature

  18. A.

     Which lies between the dry bulb and wet bulb temperatures of the incoming stream

    B.

     Which lies between the wet bulb and dew point temperatures of the incoming stream

    C.

     Which is lower than the dew point temperature of the incoming stream

    D.

     Of adiabatic saturation of incoming stream


  19. During heating and dehumidification process, dry bulb temperature

  20. A.

     Remains constant

    B.

     Increases

    C.

     Decreases

    D.

     None of these