Home / Mechanical Engineering / Hydraulics and Fluid Mechanics :: Section 6

Mechanical Engineering :: Hydraulics and Fluid Mechanics

  1. The coefficient of venturifiume, generally, lies between

  2. A.

    0.3 to 0.45

    B.

    0.50 to 0.75

    C.

    0.75 to 0.95

    D.

    0.95 to 1.0


  3. Venturimeter is used to

  4. A.

    measure the velocity of a flowing liquid

    B.

    measure the pressure of a flowing liquid

    C.

    measure the discharge of liquid flowing in a pipe

    D.

    measure the pressure difference of liquid flowing between two points in a pipe line


  5. A hemispherical tank of radius (R) containing liquid upto height (H1) has an orifice of cross-sectional area (a) at its bottom. The time required to lower the level of liquid from (H1) to (H2) will be

  6. A.

    \(\frac { n } { C_d \times a\sqrt{2g} } [\frac {2}{3} R(H_1^\frac{3}{2} - H_2^\frac{3}{2}) - \frac{1}{5}(H_1^\frac{5}{2} - H_2^\frac{5}{2})]\)

    B.

    \(\frac { 2n } { C_d \times a\sqrt{2g} } [\frac {2}{3} R(H_2^\frac{3}{2} - H_1^\frac{3}{2}) - \frac{1}{5}(H_2^\frac{5}{2} - H_1^\frac{5}{2})]\)

    C.

    \(\frac { 2n } { C_d \times a\sqrt{2g} } [\frac {2}{3} R^2(H_1^\frac{3}{2} - H_2^\frac{3}{2}) - \frac{1}{5}(H_1^\frac{5}{2} - H_2^\frac{5}{2})]\)

    D.

    none of the above


  7. A flow is called super-sonic if the

  8. A.

    velocity of flow is very high

    B.

    discharge is difficult to measure

    C.

    Mach number is between 1and 6

    D.

    none of these


  9. The force present in a moving liquid is

  10. A.

    inertia force

    B.

    viscous force

    C.

    gravity force

    D.

    all of these