Home / ECE / Communication Systems :: Section 7

ECE :: Communication Systems

  1. An AM signal is detected using an envelope detector, the carrier frequency and modulating signal frequency are 1 MHz and 2 kHz respectively. An appropriate value for the time constant of the envelope detector is

  2. A.
    500 μ sec
    B.
    20 μ sec
    C.
    0.2 μ sec
    D.
    1 μ sec

  3. For signal amplitude modulated to a depth of 100% by a sinusoidal signal, power is

  4. A.
    same as that of unmodulated carrier
    B.
    twice the power of unmodulated carrier
    C.
    times the power of unmodulated carrier
    D.
    times the power of unmodulated carrier

  5. If transmitted power is 10 kW, the field strength at a distance d is 50 mV/m. If transmitted power is reduced to 2.5 kW, the field strength at the same point will be

  6. A.
    25 mV/m
    B.
    12.5 mV/m
    C.
    6.25 mV/m
    D.
    3.125 mV/m

  7. Some features of advanced mobile phone service are

    1. To provide telephone communication to a large number of telephone users within the area of a metropolitan only
    2. To use minimum amount of frequency spectrum
    3. To permit hand held as well as vehicle operation of telephone
    Which of the above are true?

  8. A.
    1 and 2 only
    B.
    1, 2, 3
    C.
    1 and 3 only
    D.
    2 and 3 only

  9. The carrier frequency will be if L = 50 µH and C = 1 nF.

  10. A.
    512
    B.
    612 kHz
    C.
    712 kHz
    D.
    812 kHz

  11. Three point tracking is achieved with

  12. A.
    double conversion
    B.
    padder capacitor
    C.
    double spotting
    D.
    variable selectivity

  13. In TV transmitter, visual exciter may consist of

    1. Video processing unit
    2. Visual modulator
    3. VSB filter
    4. Delay equaliser
    5. Frequency converter
    Which of the above are actually a part of visual exciter?

  14. A.
    1, 2 and 3
    B.
    2, 3 and 4
    C.
    1, 2, 3 and 4
    D.
    1, 2, 3, 4 and 5

  15. The positive peak of an AM wave is 16 V and the minimum value is 4 V Assuming single tone modulation, the modulation index is

  16. A.
    0.6
    B.
    0.25
    C.
    4
    D.
    0.36

  17. In a circuit the value of resistor is made four times. The noise voltage generated by this resistance will

  18. A.
    be doubled
    B.
    be increased four times
    C.
    remain the same
    D.
    become half

  19. A resistor of 10 kΩ has an rms noise voltage of 1 mV under a certain set of conditions. A resistor of 20 kΩ under the same conditions will have an rms noise voltage of

  20. A.
    1 mV
    B.
    2 mV
    C.
    1.414 mV
    D.
    4 mV