Home / ECE / Communication Systems :: Section 3

ECE :: Communication Systems

  1. Which of the following microphones works on the principle of Faraday's law?

  2. A.
    Carbon
    B.
    Condenser
    C.
    Moving coil
    D.
    Electret

  3. In a CE amplifier connection, the emitter is at ground potential for

  4. A.
    AC quantities
    B.
    DC quantities
    C.
    all quantities
    D.
    none of the quantities

  5. In an AM wave with m = 1, the carrier is suppressed. The resulting power saving will be


  6. Directive gain is

  7. A.
    a power ratio
    B.
    a voltage ratio
    C.
    a current ratio
    D.
    a distance ratio

  8. Which of the following sampling frequencies is considered adequate in voice telephony?

  9. A.
    4 kHz
    B.
    8 kHz
    C.
    16 kHz
    D.
    32 kHz

  10. In equally tampered scale, frequency of each tone equals the frequency of lower adjacent tone multiplied by

  11. A.
    (2)1/7
    B.
    (2)1/12
    C.
    (2)1/6
    D.
    (2)1/5

  12. A carrier is modulated by two modulating waves A and B having modulation indices of 0.6 and 0.8 respectively. The overall modulation index is

  13. A.
    1
    B.
    0.7
    C.
    0.2
    D.
    1.4

  14. A communication channel disturbed by additive white, Gaussian noise has a bandwidth of 4 kHz and SNR of 15. The highest transmission rate that this channel can support (in k bits/sec) is

  15. A.
    16
    B.
    1.6
    C.
    3.2
    D.
    60

  16. Which of the following microphones is used as a standard for calibration?

  17. A.
    Moving coil
    B.
    Carbon
    C.
    Condenser
    D.
    Ribbon

  18. The reactance of coupling capacitor for AC signals in an amplifier, should be

  19. A.
    as low as possible
    B.
    as high as possible
    C.
    neither low nor high
    D.
    either low or high