Home / Civil Engineering / GATE Exam Questions :: Section 6

Civil Engineering :: GATE Exam Questions

  1. A borrow pit soil has a dry density of 17 kN/m3. How many cubic meters of this soil will be required to construct an embankment of 100 m3 volume with a dry density of 16 kN/m3.

  2. A.
    94 m3
    B.
    106 m3
    C.
    100 m3
    D.
    90 m3

  3. The ultimate bearing capacity of a soil is 300 kN/m2. The depth of foundation is 1 m and unit weight of soil is 20 kN/m3. Choosing a factor of safety of 2.5, the net safe bearing cacpacity is

  4. A.
    100 kN/m2
    B.
    112 kN/m2
    C.
    800 kN/m2
    D.
    100.5 kN/m2

  5. One of the following statements is true with regards to bodies that float or are submerged in liquids :

  6. A.
    For a body wholly submerged in a liquid the stability is ensured if the centre of buoyancy is below the centre of gravity of the body
    B.
    For a body floating in a liquid the stability is ensured if the centre of buoyancy is below the centre of gravity of the body
    C.
    For a body floating in a liquid the stability is ensured if the centre of buoyancy and the centre of gravity, regardless of the relative positions of the centre of buoyancy and gravity
    D.
    For a body floating in a liquid the stability is ensured if the centre of buoyancy is below the centre of gravity and the metacentre is above both the centres of gravity and buoyancy.

  7. Transition curves are provided on the approach to horizontal curves in order to :

  8. A.
    increase jerk to allowable levels
    B.
    minimize the length of the horizontal curve
    C.
    simplify the laying-out and construction of the horizontal curve
    D.
    reduce jerk to allowable levels

  9. The flow of water (mass density = 1000 kg/m3 and kinematic viscosity = 10-6 m2/s) in a commercial pipe, having equivalent roughness ks as 0.12 mm, yields an average shear stress at the pipe boundary = 600 N/m2. The value of ks/δ' (δ' being the thickness of laminar sub-layer) for this pipe is

  10. A.
    0.25
    B.
    0.50
    C.
    6.0
    D.
    8.0

  11. The unconfined compressive strength of a 'stiff clay' falls in the range

  12. A.
    less than 50 kN/m2
    B.
    50 to 100 kN/m2
    C.
    100 to 200 kN/m2
    D.
    above 200 kN/m2

  13. What is the equivalent single wheel load of a dual wheel assembly carrying 20, 440 N each for pavement thickness of 20 cm ? Centre to centre spacing of tyres is 27 cm and the distance between the walls of tyres is 11 cm

  14. A.
    27, 600 N
    B.
    32, 300 N
    C.
    40, 880 N
    D.
    30, 190 N

  15. A person standing on the bank of a canal drops a stone on the water surface. He notices that the disturbance on the water surface in not travelling upstream. This is because the flow in the canal is

  16. A.
    sub-critical
    B.
    super-critical
    C.
    steady
    D.
    uniform

  17. A circular sewer 2 m diameter has to carry a discharge of 2 m3/s when flowing nearly full. What is the minmum required slope to initiate the flow ? (Assume Manning's n = 0.015)

  18. A.
    0.00023
    B.
    0.000036
    C.
    0.000091
    D.
    0.000014

  19. The material that exhibits the same elastic properties in all the directions at a point, is said to be

  20. A.
    homogeneous
    B.
    orthotropic
    C.
    visco-elastic
    D.
    isotropic