Home / Civil Engineering / Applied Mechanics and Graphic Statics :: section-1

Civil Engineering :: Applied Mechanics and Graphic Statics

  1. On a mass ‘m’ describing a circular path of radius ‘r’, the centrifugal force

  2. A.

     Acts tangentially to the circular path

    B.

     Acts towards the centre of rotation

    C.

     Acts away from the centre of rotation

    D.

     Is mw2r/g kgf


  3. The condition of equilibrium for any system of forces in a plane is

  4. A.

     That polygon of forces must close

    B.

     That resultant couple must be zero

    C.

     Both (A) and (B)

    D.

     None of the above


  5. The force acting on a point on the surface of a rigid body may be considered to act

  6. A.

     At the centre of gravity of the body

    B.

     On the periphery of the body

    C.

     On any point on the line of action of the force

    D.

     At any point on the surface normal to the line of action of the force


  7. A 2 m long ladder rests against a wall and makes an angle of 30° with the horizontal floor. Where will be the instantaneous center of rotation when the ladder starts slipping ?
    i. 1.0 in from the wall
    ii. 1.732 m from the wall
    iii. 1.0 m above the floor
    iv. 1.732 m above the floor
    The correct answer is

  8. A.

     (i) and (iii)

    B.

     (i) and (iv)

    C.

     (ii) and (iii)

    D.

     (ii) and (iv)


  9. If a body is lying on a plane whose inclination with the horizontal is less than the angle of friction, then
    i. a force is required to move the body upwards
    ii. a force is required to move the body downward
    iii. the body will not be in equilibrium
    The correct answer is

  10. A.

     only (i)

    B.

     only (ii)

    C.

     both (i) and (ii)

    D.

     both (i) and (iii)


  11. The torque produced by a force depends on
    i. the magnitude of the force
    ii. the direction of the force
    iii. the point of application of the force relative to origin
    The correct answer is

  12. A.

     only (i)

    B.

     both (i) and (ii)

    C.

     both (i) and (iii)

    D.

     all (i), (ii) and (iii)


  13. Select the correct statement

  14. A.

     The body centrode rolls on the space centrode

    B.

     The space centrode rolls on the body centrode

    C.

     Both body and space centrodes may role on each other

    D.

     The body centrode never touches space centrode


  15. The resultant of two forces P and Q is R. If Q is doubled, the new resultant is perpendicular to P. Then,

  16. A.

     P = R

    B.

     Q = R

    C.

     P = Q

    D.

     None of the above is correct


  17. Power developed by a torque, is

  18. A.

     2πNT kg m/min

    B.

     2πNT/4500 h.p

    C.

     2πNT /60 watts

    D.

     All the above


  19. The shape of a suspended cable for a uniformly distributed load over it is

  20. A.

     Circular

    B.

     Parabolic

    C.

     Catenary

    D.

     Cubic parabola