Civil Engineering :: Airport Engineering
-
The reduced levels of the ends A and B of a runway are 3025 m and 3035 m and that of its mid-point is 3015 m. The reduced level of the horizontal surface, is
-
Pick up the correct statement from the following:
-
Pick up the component not applicable to aeroplanes
-
Effective length of a runway is the distance between
-
For the proposed air port, the survey project provides
-
The maximum value of the angle of turning of the nose gear large jet aircrafts, is limited to
-
Total correction for elevation, temperature and gradient for a runway should not be more than
Whatsapp
Facebook
|
A.
Minimum turning radius of aircrafts decides the size of the apron and the radius of the curves at taxi-ends
|
|
B.
Take off and landing distances for an aircraft, determine the minimum runway length
|
|
C.
The length of the normal haul of the air craft decides the frequency of operation
|
|
D.
All the above.
|
|
A.
ends of the runway
|
|
B.
point of intersection of the obstruction clearance line and the extended plane of the runway surface, and the other end of the runway
|
|
C.
point of intersection of the glide path and the extended plane of the runway surface and the other end of the runway
|
|
D.
ends of the clear way on either side.
|