GATE Mechanical - GATE 2017-2018 Questions and Answers

Home / GATE 2017-2018 / GATE Mechanical :: Discussion

Discussion :: GATE Mechanical

In orthogonal turning of a bar of 100 mm diameter with a feed of 0.25 mm/rev, depth of cut of 4 mm and cutting velocity of 90 m/min, it is observed that the main (tangential) cutting force is perpendicular to the friction force acting at the chip-tool interface. The main (tangential) cutting force is 1500 N.

The orthogonal rake angle of the cutting tool in degree is

zero

3.58

7.16

View Answer