Home / EEE / Passive Filters :: General Questions

EEE :: Passive Filters

  1. In a certain low-pass filter, fc = 3.5 kHz. Its passband is

  2. A.
    0 Hz to 3.5 kHz
    B.
    0 Hz
    C.
    3.5 kHz
    D.
    7 kHz

  3. An RC high-pass filter consists of an 820 resistor. What is the value of C so that Xc is ten times less than R at an input frequency of 12 kHz?

  4. A.
    81 F
    B.
    161 F
    C.
    0.161 F
    D.
    220 F

  5. A series resonant band-stop filter consists of a 68 resistor, a 110 mH coil, and a 0.02 F capacitor. The internal resistance, RW, of the coil is 4 . Input voltage is 200 mV. Output voltage is taken across the coil and capacitor in series. What is the output voltage magnitude at f0?

  6. A.
    1.1 mV
    B.
    11.1 mV
    C.
    111 mV
    D.
    200 mV

  7. A sinusoidal voltage with a peak-to-peak value of 18 V is applied to an RC low-pass filter. If the reactance at the input frequency is zero, the output voltage is

  8. A.
    18 V peak-to-peak
    B.
    zero
    C.
    9 V peak-to-peak
    D.
    12.74 V peak-to-peak

  9. Vout = 500 mV, and Vin = 1.3 V. The ratio Vout/ Vin expressed in dB is

  10. A.
    0 dB
    B.
    8.30 dB
    C.
    –8.30 dB
    D.
    0.8 dB

  11. At a certain frequency, the output voltage of a filter is 6 V and the input is 12 V. The voltage ratio in decibels is

  12. A.
    6.02 dB
    B.
    –6.02 dB
    C.
    12.04 dB
    D.
    –12.04 dB

  13. An RC high-pass filter consists of a 0.2 F capacitor and a 220 resistor. The output is taken across the resistor. The circuit's critical frequency is

  14. A.
    723 Hz
    B.
    7,234 Hz
    C.
    362 Hz
    D.
    3,617 Hz