Home / ECE / Electromagnetic Field Thoery :: Section 12

ECE :: Electromagnetic Field Thoery

  1. A transmission line has primary constants R, L, G and C and secondary constant z0 and γ = (a + Jβ). If the line is loss less, then

  2. A.
    R = 0, G ≠ 0, and a = 0
    B.
    R = 0, G = a, 0 and β = |r|
    C.
    G = 0, a = β
    D.
    R = 0, G = 0, a = 0, β = |r|

  3. Which of the following is multiband HF receiving antenna?

  4. A.
    Square loop
    B.
    Log-periodic
    C.
    Conical horn
    D.
    Folded dipole

  5. A rectangular waveguide is a

  6. A.
    rectangular conducting wire to propagate electromagnetic waves
    B.
    hollow rectangular walled room carrying electromagnetic wave
    C.
    hollow rectangular conducting tube through which electromagnetic waves can be propagated
    D.
    tube antenna to transmit and receive electromagnetic waves

  7. If a and b are the dimensions of waveguide then

  8. A.
    a = 3b
    B.
    a = 2b
    C.
    a = b
    D.
    a = b/4

  9. The frequency range for satellite communication is

  10. A.
    3 to 30 kHz
    B.
    300 to 3000 kHz
    C.
    3000 to 30000 MHz
    D.
    30000 to 300000 MHz

  11. A λ/8 section of transmission line is determined of load impedance of (2 - j 5) Ω. If characteristic impedance of line is 10 Ω. Then input impedance of line is

  12. A.
    10 Ω
    B.
    (6.9 + j 7.24) Ω
    C.
    (1.75 + j 3.098) Ω
    D.
    (2 - j 5) Ω

  13. Long distance short wave radio broadcasting based on

  14. A.
    line of sight
    B.
    ionospheric wave
    C.
    ground wave
    D.
    skywave

  15. Many circles are drawn in a Smith chart used for transmission line calculations. The circle shown in the figure represents

  16. A.
    unit circles
    B.
    constant resistance circles
    C.
    constant reactance circles
    D.
    constant reflection coefficient circles

  17. A loop antenna is a commonly used for

  18. A.
    radar
    B.
    direction finding
    C.
    satellite communication
    D.
    all of the above

  19. For transmission line load matching over a range of frequencies, it is best to use a

  20. A.
    double stub
    B.
    balun
    C.
    single stub of adjustable position
    D.
    broadband directional coupler