Home / CSE / Computer Hardware :: Section 3

CSE :: Computer Hardware

  1. The ATAPI compliance is stands for?

  2. A.
    CDROM
    B.
    Bus mastering
    C.
    Mass storage device
    D.
    All of the above
    E.
    None of the above

  3. A dialog box with a bomb appears on a Macintosh screen. What type of problem has occurred?

  4. A.
    A RAM problem
    B.
    A software problem
    C.
    A ROM problem
    D.
    An ADB problem
    E.
    None of the above

  5. Capacitance is measured in units of:

  6. A.
    volts
    B.
    amps
    C.
    farads
    D.
    neutrinos
    E.
    anti-neutrinos

  7. When not in use, it is very important to keep 5 1/4 diskettes in _____.

  8. A.
    Their protective sleeves
    B.
    In a plastic bag
    C.
    On a shelf in an upright position
    D.
    In the floppy drive
    E.
    None of the above

  9. What can you use to ensure power is not interrupted, resulting in corrupted data?

  10. A.
    UPS
    B.
    Propergrounding
    C.
    Surge protector
    D.
    Sag protector
    E.
    None of the above

  11. A 25-pin female connector on the back of your computer will typically be:

  12. A.
    Serial port 1
    B.
    A parallel port
    C.
    Docking
    D.
    COM2 port
    E.
    None of the above

  13. In the Binary numbering system, a (1) represents a jumper being shorted and a (0) represents a jumper being open. On a three-bit jumper block on a SCSI drive, how would an ID of logical 3 be set?

  14. A.
    100
    B.
    010
    C.
    011
    D.
    101
    E.
    None of the above

  15. _____ help prevent power surges.

  16. A.
    Surge suppressor
    B.
    Spike protector
    C.
    UPS system
    D.
    High-grade multi-meter
    E.
    None of the above

  17. What can you use to ensure power is not interrupted, resulting in corrupted data?

  18. A.
    UPS
    B.
    Proper grounding
    C.
    Surge protector
    D.
    Nuclear powered thermal protective underwear
    E.
    None of the above

  19. The POST routine, which counts system board RAM first, is stored in:

  20. A.
    RAM
    B.
    microprocessor
    C.
    ROM BIOS
    D.
    CMOS
    E.
    8259 POST controller