Civil Engineering :: Design of Steel Structures
- The elastic strain for steel is about
- In a gusseted base, when the end of the column is machined for complete bearing on the base plate, then the axial load is assumed to be transferred to base plate
- Shear buckling of web in a plate girder is prevented by using
- For a standard 45° fillet, the ratio of size of fillet to throat thickness is
- The live load for a sloping roof with slope 15°, where access is not provided to roof, is taken as
- Shape factor is a property which depends
- If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin’s formula will be
- Horizontal stiffener in a plate girder is provided to safeguard against
- The capacity of the smallest pressed steel tank is
|
A.
1/12 of strain at the initiation of strain hardening and about 1/120 of maximum strain |
|
B.
1/2 of strain at the initiation of strain hardening and about 1/12 of maximum strain |
|
C.
1/12 of strain at the initiation of strain hardening and 1/200 of maximum strain |
|
D.
1/24 of strain at the initiation of strain hardening and about 1/200 of maximum strain |
Whatsapp
Facebook
