Home / Civil Engineering / Building Materials :: section-9

Civil Engineering :: Building Materials

  1. The maximum quantity of calcium chloride used as an accelerator in cement in percentage by weight of cement is

  2. A.

     1

    B.

     2

    C.

     3

    D.

     4


  3. The weight of a good quality brick when immersed in water for a period of 16 hours should not exceed the weight of dry brick

  4. A.

     20 %

    B.

     15 %

    C.

     10 %

    D.

     None of these


  5. Seasoning of timber is done for

  6. A.

     Increasing moisture content

    B.

     Decreasing moisture content

    C.

     Increasing strength of timber

    D.

     None to these


  7. The initial setting time of lime-pozzolana, is

  8. A.

     30 minutes

    B.

     60 minutes

    C.

     90 minutes

    D.

     120 minutes


  9. Priming consists of

  10. A.

     One part of white lead, 8 parts of chalk and four parts of twice boiled linseed oil

    B.

     8 parts of white lead, one part of chalk and four parts of twice boiled linseed oil

    C.

     One part of white lead, 8 parts of chalk and one part of linseed oil

    D.

     None to these


  11. The main function of alumina in brick earth is

  12. A.

     To impart plasticity

    B.

     To make the brick durable

    C.

     To prevent shrinkage

    D.

     To make the brick impermeable


  13. A well seasoned timber may contain moisture up to

  14. A.

     4 to 6 %

    B.

     6 to 8 %

    C.

     8 to 10 %

    D.

     10 to 12 %


  15. The commonly used thinner in oil paints, is

  16. A.

     Naphtha

    B.

     Turpentine

    C.

     Both (a) and (b)

    D.

     None the these


  17. Most commonly used solvent in oil paints, is

  18. A.

     Petroleum

    B.

     Spirit

    C.

     Coal tar

    D.

     Turpentine


  19. Plaster of Paris is obtained by calcining

  20. A.

     Bauxite

    B.

     Gypsum

    C.

     Lime stone

    D.

     None of these