Civil Engineering :: Building Construction
-
The type of pointing in which a V-shaped projection outside the wall surface, is provided, is called
-
Pick up the correct statement from the following:
-
Pick up the correct statement about silt soil from the following :
-
Pick up the correct statement from the following :
-
Pick up the correct statement from the following:
-
A pre-stressed concrete pile is
-
The highest line of sloping roof, where two oposite slopes meet, is known as
-
The vertical sides of a door and window openings provided in a wall, are known as
-
The piece of a brick cut along the centre of width in such a way that its length is equal to that of full brick, is called
Whatsapp
Facebook
|
A.
The bearing capacity of a pile is defined as the load which can be sustained by the pile without producing excessive settlement |
|
B.
The ultimate bearing capacity of a pile is defined as the maximum load which the pile carries and continues to sink without any further increases of load |
|
C.
The safe bearing capacity of a pile is obtained by dividing the ultimate bearing capacity with a suitable factor of safety |
|
D.
The factor of safety for piles is taken as 6 |
|
E.
All the above. |
|
A.
Plain cement concrete is equally strong in compression as well as in tension |
|
|
B.
Slump test is performed to check concrete strength |
|
|
C.
Curing of concrete is done for proper compaction of cement |
|
|
D.
Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates |
|
E.
|