Discussion :: Computer Networking
-
The Corporate router receives an IP packet with a source IP address of 192.168.214.20 and a destination address of 192.168.22.3. Looking at the output from the Corporate router, what will the router do with this packet?
Corp#sh ip route
[output cut]
R 192.168.215.0 [120/2] via 192.168.20.2, 00:00:23, Serial0/0
R 192.168.115.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0
R 192.168.30.0 [120/1] via 192.168.20.2, 00:00:23, Serial0/0
C 192.168.20.0 is directly connected, Serial0/0
C 192.168.214.0 is directly connected, FastEthernet0/0
|
A.
The packet will be discarded. |
|
B.
The packet will be routed out the S0/0 interface. |
|
C.
The router will broadcast looking for the destination. |
|
D.
The packet will be routed out the Fa0/0 interface. |
|
E.
They will all load-balance. |
Whatsapp
Facebook
Answer : Option A
Explanation :
Since the routing table shows no route to the 192.168.22.0 network, the router will discard the packet and send an ICMP destination unreachable message out interface FastEthernet 0/0, which is the source LAN where the packet originated from.
Be The First To Comment