Civil Engineering :: Structural Design Specifications
-
For spans upto 10 m, the safe span to depth ratio for
-
The angle of inclination of the lacing bars with axis of the member is kept between
-
The distance of the critical section for shear from the periphery of the column or drop panal is at a distance (where d is effective depth of flat slab).
-
If fck is characteristic compressive strength of concrete, the flexural and split tensile strength fcr = afck N/mm2 where the value of a is
-
Pick up the correct statement from the following:
-
The value of the constant K in the formula
for determining the minimum area of tension reinforcement in a beam is -
The concrete may be accepted if the average equivalent cube strength of the cores, is at least 85% of the cube strength of the concrete grade at the specified age and no individual core possesses strength less than
-
The slenderness ratio of a tie in a roof truss if subjected to action of wind and seismic forces, should not be greater than
-
For concreting of shallow sections with vibration, the work ability of concrete should be
-
The slenderness effect of a wall is considered if the effective height of the wall exceeds the thickness
Whatsapp
Facebook
|
A.
Net sectional area of a tension member is its gross area less deductions for holes
|
|
B.
Gross diameter of river hole is 1.5 mm in excess of its normal diameter if it is greater than 25 mm
|
|
C.
Gross diameter of the rivet hole is 2.0 mm in excess of its normal diameter if it is greater than 25 mm
|
|
D.
The total deduction area for the holes is obtained by the product of the thickness and sum of the diameters of the holes in any chain across the member
|
|
E.
All the above.
|